Best Computer Case For Gaming

Have you been searching for the best computer case for gaming and getting confused with all the choices? If you’re building your own system, it’s essential you have the right case to ensure your hardware fits.

Reading thousands of reviews is impractical, so I have prepared these reviews to help you find the right one.

Best Computer Case For Gaming – Reviews

Bestseller No. 1
Bestseller No. 2
MUSETEX Phantom Black ATX Mid-Tower Chassis Gaming PC Case with USB3.0 and 6pcs 120mm ARGB Fans, 2 Tempered Glass Panels Gaming Style Windows Computer PC Case(903-S6)
【REMARKABLE EXPANSION】This excellent ATX Mid Tower Gaming computer case supports motherboards up to E-ATX, ATX, Micro-ATX, Mini-ITX; Internal Bays: 3 x 3.5 HDD's and 3 x 2.5 SSD's.
Bestseller No. 3
Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01
Light up the system: 3 Pre-installed 120mm 12V motherboard Sync RGB fans (Sync with ASUS, Gigabyte, MSI, Asrock, and BIOSTAR 12V header Motherboards) + 1 Black fan at back

There are a number of options when it comes to picking your next best gaming computer case. Different brands are always coming up with new cases each day, so which one do you choose? This often makes some people have a hard time deciding.

This will not have to keep happening if you have the guide. Below is a guide to get you started on picking the best computer case.

1. CM Storm Stryker – Gaming Full Tower Computer Case

The Storm Stryker gets my vote for the best full tower case. Coming in a slick white and black, it looks just right for gamers.

The front panel has a mesh to keep the components inside cool, and the rubber coated handle is very strong.

One of the more interesting and useful features of the Stryker is its 90 degree combination cages, as you can rotate them. This really helps when it comes to installation.

There are 9+1 expansion slots and a couple of USB 3.0 SuperSpeed ports, and you can control the fan speed on the accessible panel. There’s support for the latest graphics cards from Nvidia and AMD so no worries there.

The addition of an interior toolbox will once in handy for storing your gamer gear too. The case also has space at the back so those cables and wires don’t make a mess, really nice. Gaming PCs generate a lot of heat, but the air flow in the Stryker is very good.

With other systems you’re better off getting a newer fan, but these stock fans are sufficient. Capacity wise the Stryker has plenty of room for micro and large ATX motherboards. There is room for standard video cards, and if you’ve got a large video card, just remove one of the bays and you’ll be able to install it.

2. Corsair Carbide Series SPEC-01 Mid Tower Gaming Case

The SPEC-01 from the Carbide Series is one of the best mid tower case options for gamers, period.

All the things you could want from a mid tower case – durability, expandability and smart design – are here.

The aggressive looks befits a gaming case, and the large side panel gives you a bird’s eye view of the components, and the front intake fan is lit by LED, showing you how it draws cool air in your system.

Best Computer Case For Gaming: Best PC cases in 2019

A peek inside the SPEC-01 shows there is space for 5 fans, and you can combine SSD trays and hard disks four different ways. With this type of flexibility it’s easier to upgrade components and make adjustments.

The case also comes with cutouts for cable routing so you don’t have to worry about cables cluttering your system. And as for dust, well the dust filters will take care of that. The USB 3.0 connector is in front for easy access.

Going back to the 120 mm fan, it is clear from the moment you use it that air directed inside, more specifically your graphics card. The fan has a wide range so it should work fine, but if you want to add another 120 mm or 140 mm fan there is room for it.

3. VIVO Micro ATX Mini Tower Computer Gaming PC

Personally I think the VIVO Micro is one of the best ATX case for mini towers owing to the design.

It is aimed at budget gamers and general purpose PC users, and its specs don’t disappoint. Aside from the expected USB ports, there is efficient airflow as well.Let’s take a look at the specifics and you’ll understand why I like this.

While it’s a mini tower, the features are significant. There are three USB ports, one for USB 3.0 and a couple for USB 2.0. There is an HD audio for a mic and headphones, and an 80mm fan is installed at the rear. There are also fan ports on the front and side should you decide to install more.

The interior has plenty of room: it can hold VGA cards with a length of 290 mm max, as well as 14 mm PSU and a CPU cooler as high as 147 mm. Measuring 14.84″ x 7.32″ x 14.17″ (L x W x H), the case is small but well designed.

It feels a bit light but it’s durable, and the mounting options for SSD are really good with one internal (3.5”) and an external slot (5.25”). You can remove the sides if you want greater access. If you’ve ever had to take out a motherboard just to install a cooler, you will appreciate this feature.

4. Thermaltake CHASER MK-1 ATX Build

The Chaser is a feature packed case that’s fit for power gamers. There are two LED ColorShift fans included, and they change colors too for a nice effect.

The fan controllers run fine out of the box but a fan controller is built in.

With this you can choose the fan speed, change the color modes, lighting effects and more. This is a very flexible case any way you look at it.

The Chaser has a spacious interior so the cables and wires don’t get messed up. If you’re building your own PC, the case’s design lets you a water cooling system. There is also a HDD/SDD docking station for rapid data transfer.

For gamers there is support for high end GPUs, and it even comes with a gaming headset holder. Combine that with the cable management system and you can say goodbye to cluttered desktops.

The case has lots of room at the back of the motherboard. You could use that to conceal the cords or store accessories, and putting drives in the sliding mounts is easy.

One more thing: this is one of those gaming cases that has two USB 3.0 ports, and since they’re on top, easy to access. And if you’re into multiple graphic cards, there is room for an SLI or CrossFire setup.

5. Zalman Z9 Neo Performance Gaming Mid Tower Case, White

The Zalman Z9 gaming PC cases are equipped to handle the needs of most gamers.

There are 7 expansion slots including four USB ports, 2 for USB 3.0 and USB 2.0. You can install 420 mm VGA cards.

And 160 mm CPU coolers including water based cooling systems. There are 2 x 5.25″ external drive bays and 4 x 3.5” internal drive bays, and there are the usual slots for headphone and mic.

There are five 120 mm fans installed. The reset, power, audio and USB ports are all set on top of the case so it’s easy to reach. If you want to look at the interior, the side smoky acryl tuning allows you to do that.

And if you check the front door’s inner component, you’ll realize there is a soundproof pad built in that reduces the noise it makes. The case is built solidly and should keep your PC running cool.

Best Computer Case For Gaming: Best PC cases in 2019

You can separate the upper panel if you need more cooling, and even its plastic components feel solid, not flimsy as you might expect. While there are only four drive bays, that should suffice for most users and it does allow for a roomier interior. As for the aesthetics it doesn’t do too badly either with its smoky dark look.

6. NZXT Phantom 410 Mid Tower USB 3.0 Gaming Case

The Phantom 410 earns points for its striking appearance, but there’s more to it than that.

There are half a dozen 3.5” internal slots and 3 5.25” external drive bays, and there’s sufficient clearance for a water cooling system or 240mm dual radiator.

All good gaming cases have cable management, and this is no exception. With regards to fans the interior pivot can be adjusted for optimum air flow.

The HDD cage can be removed so you can install more video graphics cards, and the HDD trays will keep SSD in place. When it comes to cooling, the Phantom delivers with a 1x 140mm and 2 x 120mm fan included.

If that is not enough, there is room here for up to 8 fans. The fans run quietly and keep your computer cool, and if you want to make adjustments to the fan it’s easy to do so. The case itself looks and feels solid.

It has an ergonomic design, and there are a good number of jacks and slots to give you the flexibility you’re looking for. Compared to other cases, the Phantom’s width is normal and won’t take up too much space.

The case itself is made of metal and looks like it is built to last. Air fans work fine here but you can use a water cooling system as well..

What to Look for in Computer Gaming Cases

Buying the best computer case for gaming is easier today than it has ever been. However you have to be careful when it comes to choosing a case, as it will determine what type of computer you can build. Here are some suggestions.

Choose the Right Size

This one is simple enough to understand: the bigger the case, the more hardware you will be able to put inside it. If you plan to install several optical drives and hard disks, the case must have the room for them.

These cases come in different sizes but they are generally classified as mini tower, mid tower and full tower. The term form factor refers to the case’s interior design and what type of motherboard it supports.

There are different types, but the most common are micro ATX (9.6 by 9.6 in) and ATX (12 x 9.6 in). If you are after expansion, get a case that supports the ATX motherboard.

Drive Bays

The bigger the case, the more drive bays it will probably have. There are three types of drive bays: the 5.25 inch, the 3.5 inch and the 2.5 inch bay.

  • o The 5.25 inch bay is wide and suitable for Blu-Ray and DVD optical drives. Some audio controllers and fans may also use the 5.25 inch bays.
  • o The 3.5 inch bays are also found in these cases, with some external or internal. The internal bays are used to store hard drives. The external drive bays used to be for floppy disks, but now they’re used for card readers.
  • The 2.5 inch bay is still rare compared to the 5.25 and the 3.5, but they are slowly finding their way across several gaming cases. These are used for solid-state drives (SSDs) and compact hard drives. These bays are usually set under the 3.5 inch bay.

Expansion Slots

The majority of ATX cases have 6 to 7 expansion slots so you can add more cards. A micro ATX case only has around 4. However, manufacturers have become creative, and some gaming cases now have as many as ten slots.

As is the case with the case size, the more expansion slots the more flexible your upgrade options will be.

Front Panel Ports

Having ports in front of your PC is convenient so you don’t have to get up and reach for the rear just to attach a device. Mic and headphone jacks are standard in all cases, and you’ll also see most have at least two USB 2.0 ports. However, more and more cases now have ports for USB 3.0, great if you want to use high speed devices.

Power Supply

Some cases have a power supply built in. This is the more convenient option, but if you want to build your own PC, a separate power supply is preferable.

Final Verdict

We often take the case for granted. After all when you buy a PC it is included, and for many users there is no need to replace them.

But if you’re getting new hardware or you don’t like the USB ports location, it is time to get a new case. With the best computer case for gaming reviews here you’ll be ready to set up the gaming rig of your dreams.